How to Fix Incompatible Print Cartridge Bug on HP Deskjet D1330 Series Printer?

As an HP printer customer, once you install a print cartridge, the power light continues to blink. It means that the print will not print and you error message “Incompatible Print Cartridge” displays on the computer screen. To troubleshoot the problem of the incompatible print cartridge it is advisable to take HP Technical Support from the experts and qualified techies.

how-to-fix-incompatible-print-cartridge-bug-on-hp-deskjet-D1330-series-printer?

In addition, you can also try to fix the troublesome situation of the incompatible ink cartridge, follow the steps given below:

Close printer cover:

·        Close the printer cover if it is open.  

Determine which the problem cartridge is:

·        Launch the ink cartridge access door and remove either cartridge.
·        Now, you need to close the cartridge access door.
1.     Printer cartridge will remain in the printer, in case the computer message is Print Cartridge Error.
2.     If the computer message is not Print Cartridge Error but instead says ...Either missing, not detected, or incorrectly installed, then the cartridge you removed is the problem cartridge.
·        In order to reinstall the faulty cartridge, follow the next step.

Remove, inspect, and reseat the problem cartridge:

·        Launch the access door of the cartridge and wait for few minutes until the cartridge comes to the center.
·        Now, you have to press down on the end of the faulty cartridge to snap it out of the carriage.
·        Check if there is any protective plastic tape on the cartridge, if it is, then removes it. Make sure that you do not remove the copper-colored strip. 
·        Change or replace the cartridge and locate it in correct place where it belongs slight angle. Now press up and forward till the cartridge snaps into the correct position.  Place it in its slot at a slight angle, and then press up and forward until the cartridge snaps into position.

Clean the problem cartridge contacts:

·        Launch the ink cartridge and wait till the cartridge is silent or idle. Then you have to disconnect all the power cords from the back of the printer.
·        Now, remove the ink cartridge and locate it on a clean paper keeping the nozzle plate upright.
·        Then, soak a clean cloth into clean water and then squash any extra water from it.
·        Make sure to clean only the copper-colored contacts.  
·        Repeat these steps for another ink cartridge too, cleans the electrical contacts in the carriage, placed inside the printer on the carriage slots.
·        Here, you need to reinstall the ink cartridges and then close the ink cartridge access door.
·        Further you need to reinstall the ink cartridge and follow the onscreen instructions.

Insert a new print cartridge:

In case the problem is not fixed, then you need to insert a new print cartridge. If you do not have a replacement print cartridge, then you can print in ink backup mode. Delete the problem cartridge and then print with the remaining cartridge.

If the following instruction does not let you work on your printer or your printer is showing other issues, then you need to contact our customer service at HP Printer Support Phone Number +1-877-645-7494. Here, you will have support under the supervision of adept professionals who ensure to deliver reliable and customized support at your fingertips.
Location: 20765 Texas 249 Access Rd, Houston, TX 77070, USA

Comments

Post a Comment

Popular posts from this blog

How To Fix HP Photosmart 6520 Printer Error “c4eba341”?

Image
As a user of HP Photosmart printer you might encounter or receive an error message “c4eba341” that is similar to “No printing signal”; “Printer shocking” issues. You might receive such errors due to multiple reasons and there might be excessive causes of this error cover excessive startup entries, registry errors, hardware/RAM decline, fragmented files, redundant program installations etc. In order to deal with such errors, it is advisable to take HP Printer Support from the experts of the reliable helpdesk. Below we have mentioned some steps to resolve the error code that you can easily perform on your own or simply contact HP Customer Care for quick support- ·         First, you need to press “Win key”, locate it and then right click on Computer. After this, you need to select “Manage” ·         After this, you need to find and choose “Device Manager”. Once you have done with this simply double c...
Keep reading

Ways to Find out the Model Number of an HP Laptop

Image
As a user of HP laptop, you can easily find the model number of your HP laptop. You can utilize this number to specifically check your device to people struggling to service or maintain it, or to ensure that a piece of hardware used in the system is compatible or not, for instance battery. For more information, use HP Helpline Number by which you can get experts help. Follow the methods given below to find out the model number of an HP Laptop: Using System Information: ·         First of all you need to hold down the Win and then press R. This will launch the "Run" command on any Windows computer. ·         Now, you can also right-click the “Start Menu” on a computer running Windows and then click “Run”. ·         Further, you need to type msinfo32 into Run. This should be done in the search bar to the right of the "Open:" heading. ·   ...
Keep reading

How To Deal With “HP Printer Not Printing” Issues?

Image
There are multiple causes due to which you’re HP Printer Not Printing so you need to start with basic to check whether there is a warning light on the printer or error message, ensuring that there is a paper tray in the tray or not, checking the ink cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi properly or not and if it is a wireless printer, try using a USB cable instead. Most of the time the printer won’t print because it might be possible that you have installed some software which has a 'virtual' printer and this has set itself as the default, so when you hit Print in Word, you're actually saving a file instead of sending the document to your real printer. To check the process, here you need to open the “Control Panel” from the “Start menu”. Then simply go to “Devices and Printers” and right click the correct printer to use and set it as the default. After this, you need to make sure that you have selected the ...
Keep reading